Smart Tag Demo is a demonstration application of AIOI Systems Company’s visible RFID smart tag (ST1020/ST1027) or SmartCard (SC1029L). In order to use this demo, you must have Smart Tag.
Operation Condition:
* NFC-enabled Smart Phone
* Android 2.3.3 or later version
(Even after meeting the above conditions, some or all of the functions may not work in some cases because of the smart phone’s specifications.)
How to Use:
When each menu option is selected and the reader/writer is touched with Smart Tag, the process starts. To perform another operation, first release the tag from the reader/writer.
*Show demo images
Sample images will be displayed on Smart Tag starting from the first registered image. The image will switch each time you touch.
*Show snapshot
The camera takes a picture and it is displayed on Smart Tag. (After taking a picture, touch Smart Tag.)
*Show text
Enter a sentence and show it on the display area of Smart Tag.
When you touch with your finger [Touch here to input . . .] the input screen will be displayed.
Go to the next line after about 10 characters per line.
Up to 4 lines can fit into the display. (It takes a few seconds to communicate with Smart Tag.)
*Show Selected Image
The images saved in Smart phone unit can be shown on the screen of Smart Card/Tag (※When selecting file, there are Filer/Image applications such as Google Drive that cannot be used.)
*Register current image
Register the image displayed on Smart Tag. Specify numbers 1 ~ 12, then touch.
※Smart tag only.
*Show Registered image
Images that have been registered in Smart Tag will be displayed. An image will switch each time you touch.
※It is possible to specify only "1" or "2" on SmartCard.
*Write text
Write text into Smart Tag memory. Touch “Tap here to input…” to change to Entry screen.
*Read text
Read the text in Smart Tag memory and display on the screen.
*Save URL
Save the URL in the Smart Tag memory. The web address can be changed by touching the URL on the screen.
*Open URL
Read the URL that you saved in the Smart Tag memory and open the web. (When Smart Tag is touched, the web browser starts to access the page.)
*Show ‘BugDroid’
The Android logo will display on Smart Tag.
(It takes a few seconds to communicate with Smart Tag.)
*Clear display
Clear Smart Tag display.
</div> <div jsname="WJz9Hc" style="display:none">สมาร์ทแท็กการสาธิตเป็นโปรแกรมการสาธิตของไอโออิระบบของ บริษัท ฯ มองเห็นสมาร์ทแท็ก RFID (ST1020 / ST1027) หรือ SmartCard (SC1029L) เพื่อที่จะใช้การสาธิตนี้คุณต้องมีสมาร์ทแท็ก
การดำเนินงานสภาพ:
* เปิดใช้งาน NFC มาร์ทโฟน
* Android 2.3.3 หรือเวอร์ชั่นที่ใหม่กว่า
(แม้หลังจากการประชุมเงื่อนไขข้างต้นบางส่วนหรือทั้งหมดของการทำงานอาจไม่ทำงานในบางกรณีเพราะคุณสมบัติของโทรศัพท์สมาร์ท.)
วิธีใช้:
เมื่อตัวเลือกแต่ละเมนูจะถูกเลือกและผู้อ่านนักเขียน / สัมผัสกับแท็กสมาร์ทกระบวนการเริ่มต้น ในการดำเนินการอีกครั้งแรกที่ปล่อยแท็กจากเครื่องอ่าน / เขียน
* แสดงภาพการสาธิต
ภาพตัวอย่างจะปรากฏบนสมาร์ทแท็กเริ่มต้นจากภาพที่ลงทะเบียนครั้งแรก ภาพที่จะเปลี่ยนทุกครั้งที่คุณสัมผัส
* แสดงภาพรวม
กล้องใช้ภาพและมันจะปรากฏขึ้นบนสมาร์ทแท็ก (หลังจากที่ถ่ายภาพสัมผัสแท็กสมาร์ท.)
* แสดงข้อความ
ป้อนประโยคและแสดงบนพื้นที่แสดงผลของสมาร์ทแท็ก
เมื่อคุณสัมผัสด้วยนิ้วของคุณ [สัมผัสที่นี่เพื่อป้อนข้อมูล . .] หน้าจอการป้อนข้อมูลจะปรากฏ
ไปที่บรรทัดถัดไปหลังจากนั้นประมาณ 10 ตัวอักษรต่อบรรทัด
ถึง 4 เส้นสามารถใส่ลงในการแสดงผล (ใช้เวลาไม่กี่วินาทีในการสื่อสารกับสมาร์ทแท็ก.)
* แสดงภาพที่เลือก
ภาพที่บันทึกไว้ในหน่วยโทรศัพท์สมาร์ทจะแสดงให้เห็นบนหน้าจอของสมาร์ทการ์ด / แท็ก (※เมื่อเลือกไฟล์ที่มี Filer / โปรแกรมภาพเช่น Google ไดรฟ์ที่ไม่สามารถนำมาใช้.)
ภาพปัจจุบัน * ลงทะเบียน
ลงทะเบียนภาพที่ปรากฏบนสมาร์ทแท็ก ระบุหมายเลข 1 ~ 12 จากนั้นสัมผัส
สมาร์ทแท็ก※เท่านั้น
* แสดงภาพที่สมัครสมาชิก
ภาพที่ได้รับการจดทะเบียนในสมาร์ทแท็กจะปรากฏ ภาพจะเปลี่ยนทุกครั้งที่คุณสัมผัส
※มันเป็นไปได้ที่จะระบุเพียงแค่ "1" หรือ "2" ใน SmartCard
* เขียนข้อความ
เขียนข้อความลงในหน่วยความจำสมาร์ทแท็ก สัมผัส "แตะที่นี่เพื่อป้อนข้อมูล ... " เพื่อเปลี่ยนไปยังหน้าจอรายการ
* อ่านข้อความ
อ่านข้อความในหน่วยความจำสมาร์ทแท็กและแสดงบนหน้าจอ
* URL บันทึก
บันทึก URL ในหน่วยความจำสมาร์ทแท็ก ที่อยู่เว็บสามารถเปลี่ยนแปลงได้โดยการสัมผัส URL บนหน้าจอ
* เปิด URL
อ่าน URL ที่คุณบันทึกไว้ในหน่วยความจำสมาร์ทแท็กและเปิดเว็บ (สมาร์ทแท็กเมื่อสัมผัสเว็บเบราเซอร์จะเริ่มต้นในการเข้าถึงหน้า.)
* แสดง 'BugDroid'
โลโก้ Android จะแสดงบนสมาร์ทแท็ก
(ใช้เวลาไม่กี่วินาทีในการสื่อสารกับสมาร์ทแท็ก.)
* การแสดงผลที่ชัดเจน
จอแสดงผลที่ชัดเจนสมาร์ทแท็ก</div> <div class="show-more-end">